CMS491P2 / CMS492P2 / CMS491CP2 / CMS492CP2
Installation Instructions
8
5.
Position the EGX-SF2 housing into side opening of
CMS491/CMS492; (See Figure 4) OR, into top of projector
mount plate in the CMS491C/CMS492C underneath the
opening where the outlet box will be reattached. (See
Figure 3) OR (See Figure 4)
6.
Reinstall outlet box in the EGX-SF2 housing. (See Figure 3)
OR (See Figure 4)
7.
Rotate outlet box clockwise until it is in proper position to be
secured to the EGX-SF2 housing. (See Figure 3) OR (See
Figure 4)
8.
Tighten two Phillips screws to secure outlet box to EGX-
SF2 housing. (See Figure 3) OR (See Figure 4)
Figure 3
Figure 4
9.
Make sure grounding screw is properly installed. (See
Figure 5)
WARNING:
ELECTRICAL SHOCK HAZARD! Turn off
power to device before performing service or connecting to
outlet.
Figure 5
10. Remove 6-32 x 1/2” Phillips flat head screw and lock
washer from front of EGX-SF2 box. (See Figure 6)
Figure 6
(CMS491CP2 shown as example)
5
6
7
7
8
x 2
(housing box not shown for clarity)
5
6
7
5
8
x 2
(CMS491P2 shown as example)
Grounding screw
11
x 1
(B)
A (installed)
lock
washer
10
(CMS491CP2 shown as example)
(housing box not shown for clarity)
lock washer
