CMA170
Installation Instructions
6
Installing CMA-170 to Display
NOTE:
A PCS/MCS bracket must be used to attach a display
to the CMA-170.
1.
Attach bracket (B) to CMA-170 using two 1/4-20 x 7/8"
button head cap screws (H) from INSIDE CMA-170. (See
Figure 4)
Figure 4
2.
Attach CMA-170 to PCS/MCS bracket using two
1/4-20 x 3/8" button head cap screws (G). (See Figure 5)
Figure 5
3.
Attach CMA-170 to display pipe mount using one pipe
bracket (C), two 5/16-18 x 7/8" button head cap screws (J)
and nylon spacers (M). (See Figure 6)
Figure 6
Reattaching Projector/Display
1.
Reattach the pipe to the ceiling mount following instructions
included with the mount.
2.
Reattach the projector/display to the mount following
instructions included with the mount.
Installing CPU
1.
Install the CPU into the CMA-170 and place it on the six
shelves located in the CMA-170. (See Figure 7)
Figure 7
1
(H) x 2
(B)
(A)
2
(G) x 2
(A)
PCS/MCS
3
(J) x 2
(M) x 2
(C)
(A)
Place CPU on
interior shelves
CPU
(A)
