![background image](http://html1.mh-extra.com/html/chief/64518/64518_owners-manual-and-safety-instructions_2601102004.webp)
Page 4
For technical questions, please call 1-888-866-5797.
Item 64518
Sa
FE
ty
Op
Era
ti
O
n
Maint
Enanc
E
SE
tup
Service
1.
Tool service must be performed only
by qualified repair personnel.
2.
When servicing a tool, use only identical
replacement parts. use only authorized parts.
3.
use only the lubricants supplied with the
tool or specified by the manufacturer.
air Source
1.
never connect to an air source that
is capable of exceeding 200 psi.
Over pressurizing the tool may cause
bursting, abnormal operation,
breakage of the tool or serious injury
to persons. Use only clean, dry, regulated
compressed air at the rated pressure or within the
rated pressure range as marked on the tool.
Always verify prior to using the tool that the air
source has been adjusted to the rated air pressure
or within the rated air-pressure range.
2.
Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source
for the tool.
Such gases are capable of
explosion and serious injury to persons.
SaVE tHESE inStructiOnS.
Symbols and Specific Safety instructions
Symbol Definitions
Symbol
property or statement
pSi
Pounds per square inch of pressure
BpM
Blows per minute
cFM
Cubic Feet per Minute flow
ScFM
Cubic Feet per Minute flow
at standard conditions
npt
National pipe thread, tapered
npS
National pipe thread, straight
Symbol
property or statement
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning Risk of
Hearing Loss. Wear hearing protection.
WARNING marking concerning
Risk of Respiratory Injury. Wear
NIOSH-approved dust mask/respirator.
WARNING marking concerning
Risk of Explosion.