Chicco Paint, Instructions For Use Manual

Page: 11 / 36

11
CHICCO PAINT BABY WALKER
Parts
a) Baby walking frame
b) Padded seat with semi-rigid backrest
c) 2 front swivel wheels
d 2 rear ixed wheels
e) 6 stoppers
f) Play panel (NOTE: the toy contained in the box may
differ from the one illustrated in diagram f)
g) Fastener rings
HOW TO ASSEMBLE THE BABY WALKING FRAME
1. Turn the baby-walking frame (a) upside down. Fit the
wheels (c) in the appropriate housings using the plastic
tool, as shown in diagram 1. Ensure that the wheels’
male securing pin is safely locked into position in each
housing.
2. Fit the rear wheels (d) into the designated seats, as
seen in diagram 2. Ensure that the wheels’ male secur-
ing pin is safely locked into position in each housing:
you will hear it click into place and the rod connector
pin will now be visible.
3. Fit the stoppers (e) into the appropriate housings, as
shown in diagram 3A. Ensure that the joints of all the
stoppers are irmly and correctly itted to the end (dia-
gram 3B).
4. Position the baby walker ready for use with the wheels
on the loor (on a lat surface);lift the tray slightly as
seen in diagram 4, pulling it upwards until you hear it
click into position at the desired height.
WARNING: Before placing the child in the baby-walk-
ing frame, ensure that the blue button, located under
the small table, is safely locked: a click will be heard,
indicating that the button is locked into position.
See diagram 5.
5. Insert the plastic rings of the padded seat (b) in the
slots located along the upper edge of the baby-walking
frame (diagram 6A), and ensure that they are correctly
locked in the position, as shown in the diagram 6B.
ADJUSTING THE BABY WALKER
WARNING: when opening, adjusting or closing the product,
ensure that your child is at a safe distance.
6. To open the baby walker, lift the tray slowly pulling it up
towards you until you hear it click into position (diagram
4 /5).
7. To adjust the seat height, remove your child from the
walker, push the tray upwards until you hear it click
into position. To lower the height, take hold of the pin
housed under the tray and turn it counter clockwise,
push the pin upwards and allow it to slide as you lower
the tray to the desired position. When the pin is re-
leased, the tray will automatically lock into position
(diagram 7/8).
WARNING: Before placing your child in the baby walk-
er, check that the pin is correctly locked in position, as
seen in diagram 5.
8. To close the baby walker, turn the pin housed under the
tray counter clockwise and push it pin upwards. Lower
the seat until it is completed closed. (diagram 7).
WARNING: Never close the baby walker with the child
in inside.
PLAY PANEL
COMPOSITION: Exterior - 100% polyester, Interior 100%
polyurethane (the play panel has a variety of activities to
develop a baby’s sensorial, tactile and hearing skills.)
• WARNING: Do not attach any string to lengthen the toy
fasteners on the play panel and do not make any knots or
loops: this could cause accidental formation of running
knots which could lead to strangulation.
• WARNING: This toy must only be used under adult su-
pervision.
• WARNING: Before using the product, remove and di-
spose of any plastic bags and any other packaging (e.g.
fasteners and ixing ties etc) and keep them out of
reach of children.
• WARNING: Before irst use, check that the product and
all its components show no signs of damage caused
by transportation. Check the product regularly for signs
of wear and damage. Keep all damaged parts out of
children’s reach.
• WARNING: The child may be hurt if you do not follow
these instructions.
CLEANING AND MAINTENANCE
• This product requires periodic maintenance. The cleaning
and maintenance operations must only be carried out by
an adult.
• Use a soft damp cloth to clean the fabric, plastic parts
and the stoppers.
• Do not clean the product with abrasive products or sol-
vents.
• Always dry the metal parts to prevent the formation of
rust.
CARE AND MAINTENANCE
• WARNING: Protect the toy from heat, dust, sand, and
water.
• WARNING: The baby walker was not designed for use
when feeding a child; it is recommended not to use it
when feeding your child.
TIPS FOR CLEANING
COMPOSITION: Exterior - 100% polyester, Interior 100%
polyurethane
Hand wash in cold water
Do not bleach
Do not use a dryer
Do not iron
Do not dry clean