SKU 90568
Page 5
Service
24. Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of
injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES FOR THE ROTARY TOOL
1.
Accessories must be rated for at least the speed recommended on the tool
warning label. Wheels and other accessories running over rated speed can
fly apart and cause injury.
2.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tools may contact hidden wiring or its own cord. Contact with a
”live” wire will make exposed metal parts of the tool “live” and shock the
operator.
3.
Maintain labels and nameplates on the Rotary Tool. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
4.
Always wear ANSI approved safety impact eye goggles and heavy work
gloves when using the Rotary Tool. Using personal safety devices reduce the
risk for injury. Safety impact eye goggles and heavy work gloves are available
from Harbor Freight Tools.
5.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in
areas near flammable chemicals, dusts, and vapors. Do not use this product
in a damp or wet location.
6.
Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Rotary Tool.
7.
Do not force the Rotary Tool. This tool will do the work better and safer at the
speed and capacity for which it was designed.
8.
Always unplug the Rotary Tool from its electrical outlet before performing and
inspection, maintenance, or cleaning procedures.
9.
Never leave the Rotary Tool unattended while running. Turn power off if you
have to leave the Rotary Tool.
90568a.p65
10/22/03, 11:50 AM
5
