background image

WARNING HYDRAULIC POWER PACK 

Any piece of equipment can be dangerous if not operated properly.  

YOU

 are responsible for the safe operation 

of this equipment.  The operator must carefully read and follow any warnings, safety signs and instructions 
provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety 
devices or warnings on this equipment.  

IF

 any safety devices or warnings have been removed, defeated, 

defaced or rendered inoperable, 

DO NOT USE THIS EQUIPMENT!!!

 

 

IMPORTANT SAFETY RULES TO FOLLOW

.

 

Post this Safety and operating instruction at work locations, provide copies to employees, and make sure that 
everyone reads the Safety and operating instruction before operating or servicing the machine. 
In addition, the operator or the operator's employer must assess the specific risks that may be present as a result 
of each use of the machine. 

 

Safety signal words: The safety signal words 

Danger

Warning

 and

 Caution

 have the following meanings:  

DANGER

: Indicates a hazardous situation which, if not avoided, could result in death or serious injury. 

WARNING:

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

 

CAUTION: 

Personal precautions and qualifications only qualified and trained persons may operate or

 

maintain 

the machine. They must be physically able to handle the bulk, weight, and power of the tool. Always use your 
common sense and good judgment. 

 

PERSONAL PROTECTIVE EQUIPMENT  

Always use approved protective equipment. Operators and all other persons in the working area must wear 
protective equipment, including at a minimum: 

Protective helmet

Hearing protection,

 

Impact resistant eye 

protection with side protection, Respiratory protection when appropriate, Protective gloves, Proper 
protective boots, Appropriate work overall or similar clothing (not loose-fitting) that covers your arms 
and legs.

 

WARNING 

Drugs, alcohol or medication Drugs, alcohol or medication may impair your judgment and powers 

of concentration. Poor reactions and incorrect assessments can lead to severe accidents or death. 
► Never use the machine when you are tired or under the influence of drugs, alcohol or medication. 
► No person who is under the influence of drugs, alcohol or medication may operate the machine. 

WARNING 

Hydraulic oil at high pressure Thin jets of hydraulic oil under high pressure can penetrate the skin 

and cause permanent injury. Immediately consult a doctor if hydraulic oil has penetrated the skin. Never use 
your fingers to check for hydraulic fluid leaks. Keep your face away from any possible leaks. 

WARNING

 Hydraulic oil Spilled hydraulic oil can cause burns, accidents due to slippery conditions and will 

also harm the environment. Take care of all spilled oil and handle it according to your safety and environmental 
regulations. Never dismount the hydraulic machine when the hydraulic oil is hot. 

CAUTION 

Skin eczema Hydraulic oil can cause eczema if it comes in contact with the skin. Avoid getting 

hydraulic oil on your hands. Always use protective gloves when working with hydraulic oil. Wash hands after 
contact with hydraulic oil. 

CAUTION

 Moving parts Risk for crushed hands and fingers. Never check bores or passages with hands or 

fingers. Never operate the machine when adjusting the choke control or fuel valve. 

WARNING Whipping hydraulic hose 

Hydraulic hoses under pressure can whip uncontrollably if screws 

loosen or are loosened. A whipping hydraulic hose can cause severe injuries.

 

Depressurize the hydraulic system 

before loosening the connection of a hydraulic hose. Tighten the nuts on the connections of the hydraulic hoses 
to the required torque. Check that the hydraulic hose and the connections are not damaged

 

If the person receiving this handout will not be the user of the equipment, forward these instructions to the 
operator.  

IF

 there is any doubt as to the operation or safety of the equipment, 

DO NOT USE!!!  CALL A 

TOOL SHED IMMEDIATELY!!!  FAILURE TO FOLLOW THESE INSTRUCTIONS COULD 
RESULT IN INJURY OR DEATH 

 

Summary of Contents for PAC P13











Reviews: