Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA
The European Hydraulic Tool Manufacturers
Association (EHTMA) has categorised hydraulic
power packs and tools in terms of flow rate and
working pressure.
PAC P9
20 l.p.m. (5 US gal/min)
Flow rate
125 bar (1,810 psi)
Nominal pressure
150 bar (2,175 psi)
Max pressure
C
EHTMA category
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source
used is in a compatible category. If any doubt,
consult an authorised supervisor.
Safety label
Fuel label
Lifting point label
Installation
WARNING
Whipping hydraulic hose
Hydraulic hoses under pressure can whip
uncontrollably if screws loosen or are loosened. A
whipping hydraulic hose can cause severe injuries.
►
Depressurise the hydraulic system before
loosening the connection of a hydraulic hose.
►
Tighten the nuts on the connections of the
hydraulic hoses to the required torque.
►
Check that the hydraulic hose and the connections
are not damaged.
Quick-release couplings
The original hydraulic hoses are fitted with Flat-Face
quick-release couplings that are strong and easy to
clean. The quick-release couplings are fitted so that
the male connection supplies oil and the female
connection receives oil.
NOTICE
Wipe all couplings clean before
connecting. Ensure that couplings are clean and
correctly engaged before operation. Failure to do so
may result in damage to the quick couplings and
cause overheating and cause foreign matter to enter
the hydraulic system.
11
3392 5183 01b | Original instructions
Safety and operating instructions
PAC P13
