Chicago Pneumatic CPG 90-120 JD, Instruction Manual

Page: 16 / 56

- 16 -
Qc1002™ Menu Overview
At Qc1002™, the LCD will show following
information:
– in Normal condition (scroll through the
information using UP and DOWN ):
• Status (eg: preheat, crank, cooldown, extended
stop time, …) (pop-up: this display is only
shown when a Special status comes up)
• Controller type & version
• Parameter list
• Alarm list
• LOG list
• Service Timer 1 & Service Timer 2
• Battery Voltage
• Coolant temperature
• Oil pressure
• RPM (speed)
• Fuel level
• Voltage - frequency - running hours
– in Alarm condition (scroll through the
information using UP and DOWN ):
• a list of all active Alarms
It's possible to scroll through the views, using the UP
and DOWN buttons. The scrolling is continuous.
If a Special status comes up, the Status Display is
shown.
If an Alarm comes up, the Alarm Display is shown.
Controller type and version display
This view shows the controller type and the ASW
version number.
Parameter display
This view shows a number of Parameter settings and
gives access to them.
An overview is given in “Parameter list” on page 18.
Alarm list display
This view shows the number of active alarms and
gives access to them.
An overview is given in “Alarm Display (pop-up
window)” on page 20.
LOG list display
This view shows the alarm memory and gives access
to it.
An overview is given in “LOG list” on page 21.
Service timer 1 & Service timer 2
display
This view shows both Service timers. The service
timer indication is shown when service time has run
out. It can be removed by resetting the timers or
acknowledging the Service timer indication.
The service timer indications count upwards and give
an alarm when the set value is reached.
Resetting the Service Timers can be done through the
Parameter display.
Qc1002 CAN
v1.00.0
Parameter
Alarm List
0 Alarm(s)
LOG List
Service 1
Service 2 59h
59h