Page
SKU 97047
For technical questions, please call 1-800-444-3353.
The Inverter gets hot during use. The heat can build up to unsafe
levels and create a fire hazard if it does not receive adequate
ventilation, due to an electrical fault, or if it is used in a hot
environment.
Do not place the Inverter on a flammable surface. Do not obstruct any vents or
fans on the Inverter.
especially avoid placing it on carpets and rugs; they
are not only flammable, but they also obstruct vents.
Place the Inverter on a stable, solid, nonflammable surface (such as a stable
metal workbench or concrete floor) at least 1 foot away from all flammable
objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector
in the area. Frequently monitor the Inverter during use.
This product is not a toy. Keep it out of reach of children.
People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter
(GFCI) should also be implemented – it prevents sustained electrical shock.
Performance of this unit may vary depending on the available battery power or
appliance wattage.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAve tHeSe inStruCtionS.
grounDing
improperly connecting the grounding wire can result in
electric shock.
Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. Do not modify
the power cord plug provided with the tool. never remove
the grounding prong from the plug. Do not use the tool if
the power cord or plug is damaged. if damaged, have it
repaired by a service facility before use. if the plug will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
.
7.
8.
9.
10.
wArning
wArning
