SKU 46237
For technical questions, please call 1-800-444-3353.
Page 14
general Operating instructions
tO preVent
SeriOuS injurY:
Grip the tool firmly in both
hands.
Plug the Cord (41) into the electrical
1.
outlet.
Secure the material being cut. Hold
2.
the Handle with one hand, and the
Back Handle (44) with the other, and
press down on the Switch (38). This
will start the motor.
Allow the tool to come up to full
3.
speed before touching the work ma-
terial.
Apply the wheel to the work mate-
4.
rial, allowing the tool to operate at
full speed. If the tool bogs down, use
lighter pressure.
To lock the tool in the “On” position,
5.
activate the Switch and push the
Switch Lock (51) button located on
the left side of the Back Handle. Now
you can continue grinding without
having to hold onto the Switch. Keep
your hand in same position in case
you need to shut off the unit in a
hurry. To turn the tool off, press down
on the Switch again.
To create a smoother surface, keep
6.
the tool moving over the work sur-
face.
Release the Trigger Switch to stop
7.
the tool.
Allow the tool to come to a complete
8.
stop before setting it down.
To prevent accidents, turn off the tool
9.
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of children’s reach.
