SKU 46237
For technical questions, please call 1-800-444-3353.
Page 6
could snag your clothing, pulling the
accessory into your body.
regularly clean the power tool’s
14.
air vents. The motor’s fan will draw
the dust inside the housing and ex
-
cessive accumulation of powdered
metal may cause electrical hazards.
do not operate the power tool near
15.
flammable materials.
Sparks could
ignite these materials.
do not use accessories that re-
16.
quire liquid coolants. Using water
or other liquid coolants may result in
electrocution or shock.
Maintain labels and nameplates on
17.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
18.
to begin work before turning on the
tool.
Do not lay the tool down until it has
19.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
Do not leave the tool unattended
20.
when it is plugged into an electrical
outlet. Turn off the tool, and unplug it
from its electrical outlet before leav-
ing.
This product is not a toy. Keep it out
21.
of reach of children.
People with pacemakers should
22.
consult their physician(s) before use.
Electromagnetic fields in close prox
-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
Some dust created by power sand-
23.
ing, sawing, grinding, drilling, and
other construction activities, contains
chemicals known [to the State of Cali-
fornia] to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and ce
-
ment or other masonry products
• Arsenic and chromium from chemi
-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you do
this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5,
et seq.
)
WARNING: Handling the cord on
24.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.
)
The warnings, precautions, and in-
25.
structions discussed in this instruction
