Page 4
For technical questions, please call 1-800-444-3353.
unpacKinG
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
assembly instructions
note: This Solar Panel comes completely assembled, but requires installation.
WirinG instructions
note: This Solar Panel produces direct current when in the presence of sunlight. The
amount of electricity produced increases as the sunlight becomes stronger. Less
amperage is produced in less sunlight, but this panel will generate electricity even
on cloudy days. This Solar Panel may be used to power small 12 volt items directly,
such as lights or small motors. It may also be used to trickle charge 12 volt storage
batteries, such as car or boat batteries. Multiple panels can be wired together for
use in residential or commercial solar power systems.
note: If you are not familiar with wiring an electrical product such as this Solar Panel,
then use of a certified electrician is recommended.
A weatherproof Connector Box is attached to the back of each solar panel. There
1.
is a red (positive) (+) wire and a black (negative) (-) wire coming out.
mountinG this solar panel
This Solar Panel is constructed of shock resistant glass mounted in a sturdy alumi-
1.
num frame. It is rugged and durable.
For optimum operation, mount your Solar Panel in a place that is exposed to maxi-
2.
mum sunlight and protected from damage.
Mounting hardware is not supplied but here are some suggestions for effective
3.
mounting.
Do not drill through the aluminum frame. You may damage the frame or break
a.
the glass. Devise brackets, clamps or a frame to hold the Solar Panel snugly
as a unit.
Use semi-flexible bumpers under the Panel to protect it from being crushed, and
b.
to allow air to circulate under the Panel.
Route the Wire in a way that it will not be exposed to excessive moisture, heat,
c.
or any corrosive or damaging conditions.
REV 07j