background image

SKU 96298        

for technical questions, please call 1-800-444-3353. 

PAGE 5

“live” wire will make exposed metal parts of the Cordless Driver “live” and shock 
the operator.

Do not use the Cordless Driver or Charger if it has been dropped, damaged, 
left outdoors, or immersed in liquid.

To avoid electric shock, do not pull or carry the Charger by its Power Cord or 
pull the Power Cord around sharp corners or edges.  
Do not unplug the Charger 
by pulling on the Power Cord.  Keep the Power Cord away from heated surfaces.

To avoid electrical shock, do not handle the Charger, the Adapter, or the Cord-
less Driver with wet hands.

Keep  the  Handles  of  the  Cordless  Driver  dry,  clean,  and  free  from  oil  or 
grease.

Avoid unintentional starting.  Make sure you are prepared to begin work before 
turning on the Cordless Driver.

Never leave the Charger unattended when it is plugged into an electrical outlet.  
Unplug the Charger from its electrical outlet before leaving.  Place the Charger on 
a solid surface such as a garage floor; never place on anything flammable.

PROPER bATTERy PACK CARE: battery Pack (19) leakage may occur under 
extreme usage or temperature conditions.  
If Battery Pack fluid comes in con-
tact with skin, rinse with lemon juice and vinegar then wash with soap and water.  
If the fluid comes into contact with the eyes, flush with water for several minutes 
and contact a doctor immediately.  Never burn the Battery Pack, as it can explode 
in a fire.  Do not charge the Cordless Driver with a leaking Battery Pack.  Contact 
local solid waste authorities for instructions on correct disposal or recycling of the 
Battery Pack.

WARNiNG! Some dust created by power sanding, sawing, grinding, drilling, and 

other construction activities, contain chemicals known (to the State of California) to 
cause cancer, birth defects or other reproductive harm.  Some examples of these 
chemicals are: lead from lead-based paints, crystalline silica from bricks and cement 
or other masonry products, arsenic and chromium from chemically treated lumber.  
Your risk from these exposures varies, depending on how often you do this type of 
work.  To reduce your exposure to these chemicals: work in a well ventilated area, 
and work with approved safety equipment, such as dust masks that are specially 
designed  to  filter  out  microscopic  particles.    (California  Health  &  Safety  Code  § 
25249.5, 

et seq.)

WARNiNG!  People with pacemakers should consult their physician(s) before 

using this product.  Operation of electrical equipment in close proximity to a heart 
pacemaker could cause interference or failure of the pacemaker.

5.

6.

7.

8.

9.

10.

11.

12.

13.

Summary of Contents for 96298















Reviews: