SKU 95065
For technical questions, please call 1-800-444-3353
Page 5
Do not force the Cordless Screw-
driver
. This tool will do the work better
and safer at the capacity for which it
was designed.
unplug the Charger Adapter from
the Cordless Screwdriver and the
electrical outlet before use or before
performing any inspection, mainte-
nance, or cleaning procedures
.
never leave the Cordless Screw-
driver unattended while running
.
Turn power off if you have to leave the
Cordless Screwdriver.
people with pacemakers should con-
sult their physician(s) before using
this product.
Electromagnetic fields
in close proximity to a heart pacemaker
could cause interference to or failure of
the pacemaker.
Connect the Charger Adapter to
a Ground Fault Circuit Interrupter
(GFCI) protected electrical outlet
.
GROunDInG
Improperly
connecting the
grounding wire can result in
electric shock.
Check with a qualified
electrician if you are in doubt as
to whether the outlet is properly
grounded. Do not modify the
power cord plug provided with
the tool. never remove the
grounding prong from the plug.
Do not use the tool if the power
cord or plug is damaged. If
damaged, have it repaired by
a service facility before use. If
the plug will not fit the outlet,
have a proper outlet installed
by a qualified electrician.
6.
7.
8.
9.
10.
Grounded Tools:
Tools with Three prong plugs
Tools marked with “Grounding Re-
quired” have a three wire cord and three
prong grounding plug. The plug must
be connected to a properly grounded
outlet. If the tool should electrically
malfunction or break down, grounding
provides a low resistance path to carry
electricity away from the user, reducing
the risk of electric shock.
The grounding prong in the plug is con-
nected through the green wire inside
the cord to the grounding system in the
tool. The green wire in the cord must
be the only wire connected to the tool’s
grounding system and must never be
attached to an electrically “live” termi-
nal.
3-prong plug and Outlet
The tool must be plugged into an ap-
propriate outlet, properly installed and
grounded in accordance with all codes
and ordinances. The plug and outlet
should look like those in the preceding
illustration.
(See 3-prong plug and
Outlet.)
Double Insulated Tools:
Tools with Two prong plugs
Tools marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwrit-
ers Laboratories, Inc., the Canadian
Standard Association, and the National
Electrical Code.
1.
2.
3.
1.
WARnInG
WARnInG
