background image

SKU 94434 

        For technical questions, please call 1-800-444-3353 

PAGE 6

chemicals are: lead from lead-based paints, crystalline silica from bricks and ce-
ment or other masonry products, arsenic and chromium from chemically treated 
lumber.  Your risk from these exposures varies, depending on how often you do this 
type of work.  To reduce your exposure to these chemicals: work in a well ventilated 
area, and work with approved safety equipment, such as those dust masks that are 
specially designed to filter out microscopic particles.  

(California Health & Safety 

Code 25249.5, et seq.)

WARNING!  

People with pacemakers should consult their physician(s) before using 

this product.  Electromagnetic fields in close proximity to a heart pacemaker could 
cause interference or failure of the pacemaker.  In addition, people with pacemak-
ers should adhere to the following:  Avoid operating power tools alone.  Don’t use a 
power tool with the power switch (Trigger) locked on.  If powered via a power cord 
be certain that the tool is properly grounded.  A ground fault interrupt (GFCI) sys-
tem is also a good precaution.  This inexpensive device is a good safety measure 
because it prevents a sustained electrical shock.  Properly maintain and inspect all 
tools before use to avoid electrical shock.

WARNING!   

The warnings, precautions, and instructions discussed in this manual 

cannot cover all possible conditions and situations that may occur.  The operator 
must understand that common sense and caution are factors which cannot be built 
into this product, but must be supplied by the operator.

PRODUCT FEATURES

NOTE:

 For additional information regarding the parts listed in the following pages, refer to 

the 

Assembly Diagram

 

on

 

page 12

.

CHARGED 

INDICATOR

CHARGING 
INDICATOR

CHARGER

POWER CORD

CHARGER

(26)

FIGURE A

TRIGGER

(19)

CHUCk 

TORQUE 

SELECTOR RING

BATTERY PACk

(22)

AUxILIARY 

HANDLE

DEPTH 

GAUGE

WARNING!

   Always make sure the Trigger of the Cordless Drill is in its 

“OFF”

 

position, the Battery Pack (22) is removed from the Cordless Drill, and the Charger 

16.

17.

1.

Summary of Contents for 94434













Reviews: