background image

SKU 94434 

        For technical questions, please call 1-800-444-3353 

PAGE 10

INSPECTION, MAINTENANCE, AND CLEANING

WARNING! 

 

Always turn the Trigger to its “OFF” position, unplug the Char-

ger (26) from its electrical outlet, and disconnect the battery before performing 
any inspection, maintenance, or cleaning.

BEFORE EACH USE,

 inspect the general condition of the Cordless Drill.  Check for 

misalignment or binding of moving parts, cracked or broken parts, leaking Battery 
Pack, damaged Charger wiring, chipped or broken Drill Bits, and any other condi-
tion that may affect its safe operation.  If abnormal noise or vibration occurs, have 
the problem corrected before further use. 

Do not use damaged equipment.

Battery Pack (22) precautions:  

Never burn Batteries, as they can explode in a 

fire.  Do not charge leaking Batteries.  Only a qualified service technician should 
perform maintenance on the Battery Pack.  Contact Harbor Freight Tool’s customer 
service for information on free, proper disposal of the Battery Pack.

DAILY:

 With a soft brush or cloth, remove all dirt and debris from the Cordless Drill.  

Do not immerse the Cordless Drill in any liquids.

When storing:  

Always remove the Battery Pack (22) from the Cordless Drill.  Keep 

the Drill and its accessories in a clean, dry location out of children’s reach.

WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for

the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or

indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of

maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use of our product. Some states do not allow the exclusion

or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY  IS  EXPRESSLY  IN  LIEU  OF  ALL  OTHER WARRANTIES,  EXPRESS  OR  IMPLIED,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our

inspection verifies the defect, we will either repair or replace the product at our election or we may elect to

refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return

repaired products at our expense, but if we determine there is no defect, or that the defect resulted from

causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

LIMITED 90 DAY WARRANTY

1.

2.

3.

4.

5.

Summary of Contents for 94434













Reviews: