SKU 93808
For technical questions, please call 1-800-444-3353.
Page 3
English
ELECTRICAL SAFETY
1.
Do not abuse the cord. Never use the cord to carry the tool. Keep cord away
from heat, oil, sharp edges, or moving parts. Replace damaged cords
immediately
. Damaged cords may create a fire.
2.
A battery operated tool with integral batteries or a separate battery pack must
be recharged only with the specified charger for the battery
. A charger that may
be suitable for one type of battery may create a risk of fire when used with another
battery.
3.
Use battery operated tool only with specifically designated battery pack
. Use
of any other batteries may create a risk of fire.
PERSONAL SAFETY
1.
Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired or under the influence of drugs, alcohol,
or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry,
or long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure switch is in the locked or off position before
inserting battery pack.
Carrying tools with your finger on the switch or inserting
the battery pack into a tool with the switch on invites accidents.
4.
Remove adjusting keys or wrenches before turning the tool on
. A wrench or a
key that is left attached to a rotating part of the tool may result in personal injury.
5.
Do not overreach. Keep proper footing and balance at all times.
Proper footing
and balance enable better control of the tool in unexpected situations.
6.
Use safety equipment. Always wear eye protection
. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
TOOL USE AND CARE
1.
Use clamps or other practical way to secure and support the workpiece to a
stable platform
. Holding the work by hand or against your body is unstable and
may lead to loss of control.
2.
Do not force tool. Use the correct tool for your application
. The correct tool will
do the job better and safer at the rate for which it is designed.
3.
Do not use tool if switch does not turn it on or off
. A tool that cannot be controlled
with the switch is dangerous and must be repaired.
