SKU 93722
For technical questions please call 1-800-444-3353
Page 5
Unpacking
When unpacking, check to make sure that the product is intact and undamaged,
and all accessories listed below are included.
SDS-plus Cordless Hammer Drill
18V Rechargeable Battery
Auxiliary Handle with Depth Gauge
Quick Charge Battery Recharge Unit
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
Using the Battery Charger
NOTE:
Battery will not reach full charge the first time they are charged. Allow
several cycles (operation followed by recharging) before the Battery will become
fully charged.
Battery Temperature Warning:
WARNING:
Battery explosion may
cause serious personal or property injury
including death. Charge the Battery only
within a 50° to 100° F. temperature range.
Lower temperatures may inhibit charging.
Higher temperatures increase chance of
battery failure, including explosion.
Battery Charger Safety:
1.
Charge the Battery only with the
included charger. Use of other
chargers may cause battery
failure including explosion.
2.
Ensure that the Battery Charger
is connected only to a 120 VAC,
60 Hz power supply that includes a circuit breaker.
Using the Battery Charger
REV 05/06
