SKU 93722
For technical questions please call 1-800-444-3353
Page 4
16.
Guard against electric shock
. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
17.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
18.
Do not operate tool if under the influence of alcohol or drugs
. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
19.
Maintenance
. For your safety, service and maintenance should be performed
regularly by a qualified technician.
20.
Pacemaker safety warning
. People with pacemakers should consult with
their physician(s) before using this product; operation of equipment in close
proximity to a heart pacemaker could cause interference or failure of the
pacemaker.
21.
Do not use any bits other than SDS-plus bits designed for hammer
drilling.
Use of improper bits may cause bit to fly out or break unexpectedly
possibly causing severe personal or property damage.
22.
If bit binds, stop the drill.
Never continue drilling if the bit binds, as you
may lose control of the drill, break a bit, or break the drill itself, resulting in
personal injury.
Note
: Performance of the charger may vary depending on variations in local line
voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
REV 04/06
