as the Saw is restarted.
D. Support large panels to minimize the risk of Saw Blade pinching and
kickback. Large panels tend to sag under their own weight. Supports must
be placed under the panel on both sides, near the line of cut and near the
edge of the panel.
E. Do not use a dull or damaged Saw Blade. Unsharpened or improperly
set Saw Blades produce a narrow kerf causing excessive friction, Saw Blade
binding and kickback.
F. Make sure all Saw adjustments are tight and secure before making a cut.
If Saw adjustments shift while cutting, it may cause binding and kickback.
G. Use caution when making a pocket cut into existing walls or other blind
areas. The Saw Blade may cut objects that can cause kickback. Also,
check to make sure there are no electrical wires or cables in the cutting path.
16.
Before using the Jigsaw, make sure the Saw Blade is properly mounted on
the tool. Make sure the Saw Blade is balanced, and is not cracked or bent.
17.
The Saw Blade will become hot while cutting. Allow the Saw Blade to
completely cool before touching.
18.
Allow the Saw Blade to stroke at full speed before feeding it into the
workpiece. Do not force the Saw Blade into the workpiece when cutting. Apply
moderate pressure, allowing the Saw Blade to cut without being forced. When
turning off the Saw, allow the Saw Blade to stop on its own. Do not press against
the Saw Blade to stop it.
19.
Turn off the Saw and allow the Saw Blade to stop on its own if the Saw
Blade is to be backed out of an uncompleted cut.
20.
Industrial applications must follow OSHA requirements.
21.
Do not stare directly at the Laser beam. A hazard may exist if you deliberately
stare into the beam. Never aim the Laser beam at any person, animal, or an
object other than the workpiece.
22.
Make sure the Laser beam is aimed at a sturdy workpiece without reflective
surfaces. Reflective surfaces are not suitable for Laser applications, as the
reflective surface may direct the Laser beam back at the operator, causing poten-
tial eye damage.
23.
Do not attempt to alter the Laser (55) or replace it with a different type. Doing so
SKU 92772 For technical questions, please call 1-800-444-3353
PAGE 7
