For technical questions, please call 1-800-444-3353.
SKU 91653
PAGE 6
9.
Never lay the tool down until it has come to a complete stop. The tool can
move on the surface in an uncontrolled fashion, possibly causing damage or injury.
10.
Make sure the material being worked on is free from obstructions and any
other foreign matter which could damage the tool.
11.
Never leave this tool unattended when it is plugged into an electrical outlet.
Turn off the tool, unplug it from its electrical outlet, and secure it in a safe storage
place before leaving the area.
12.
Always unplug this tool from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
13.
Keep all bystanders at least 50 feet away during use.
14.
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of Cali-
fornia) to cause cancer, birth defects or other reproductive harm. Some ex-
amples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
15.
WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.