manualshive.com logo in svg

Chicago Electric 91653, Assembly And Operating Instructions Manual, Page: 13 / 15

Share
Download
Chicago Electric 91653 Assembly And Operating Instructions Manual Download Page 13

For technical questions, please call 1-800-444-3353.

SKU 91653

PAGE 13

INSPECTION, MAINTENANCE, AND CLEANING

1.

        WARNING!  Make sure the Power Switch (38) of this tool is in its “OFF” posi-
tion and that the tool is unplugged from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.

2.

BEFORE EACH USE, inspect the general condition of this tool.  Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation.  If
abnormal noise or vibration occurs, have the problem corrected by a qualified
technician before further use.  Do not use damaged equipment.

5.

Periodically inspect the power cord to be sure it is in undamaged condition before
using this tool. Replace the cord if it is damaged.

6.

This tool should be stored in a dry protected area when not in use. Do not expose
this tool to a damp or corrosive atmosphere.

7.

The handle should be kept dry and free from grease.

8.

If the Switch does not operate properly, it must be replaced before using this tool.

9.

WARNING! If the locking attachment mechanism does not work properly, do not use
this tool. The attachment mechanism must work properly before using this tool.

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.

PLEASE READ THE FOLLOWING CAREFULLY

Summary of Contents for 91653
















Reviews:

No comments