manualshive.com logo in svg

Chicago Electric 91653, Assembly And Operating Instructions Manual, Page: 10 / 15

Share
Download
Chicago Electric 91653 Assembly And Operating Instructions Manual Download Page 10

For technical questions, please call 1-800-444-3353.

SKU 91653

PAGE 10

UNPACKING

When unpacking, check to make sure all the following parts are included.  If any parts are
missing or broken, please call Harbor Freight Tools at  the number shown on the cover of this
manual as soon as possible.

Garden Tool Power Head with Power Cord

Handle Assembly

Strap Assembly

Owner’s Manual

ASSEMBLY AND OPERATING INSTRUCTIONS

NOTE: For additional information regarding the parts listed in the following pages, refer
to the 

Assembly Diagram on page 15.

Assembled Power Head

,

shown with 91666 - Trimmer Attachment (sold separately).

CAUTION: Always make sure the Power Cord of  the Garden Tool Power Head is un-
plugged from its electrical outlet 

prior to assembling or making any adjustments to the

tool.

WARNING: Turn Power Switch to the off position and unplug the Power Cord before
installing or removing attachments from this tool.  Never try to install or remove an attach-
ment while the motor is running. Severe personal injury or damage to property may
result.

Connecting the Attachment to the

Power Head - 

see picture, right.

The Coupler connects the selected
attachment to the Upper Shaft of the
Motor.

1.

Turn the Locking Knob on the Cou-
pler counterclockwise to loosen it.

2.

Remove the protective plastic End
Cap  from the Attachment Shaft of
the Accessory. Save the cap for later
use.

Button

Square Drive
Shaft End

Locking Knob (opposite
side, partially hidden)

Coupler

Attachment Shaft

Upper Shaft

(Power Head)

Guide Recess

Summary of Contents for 91653
















Reviews:

No comments