23.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25.
When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the Carving/Chipping Tool. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2.
Always wear ANSI approved safety impact eye goggles, ear protection, and
heavy work gloves when using the Carving/Chipping Tool. Using personal
safety devices reduce the risk for injury. ANSI approved safety impact eye
goggles, ear protection, and heavy work gloves are available from Harbor Freight
Tools.
3.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp
or wet location.
4.
When using a hand-held power tool, always maintain a firm grip on the tool
with both hands.
5.
Always keep the extension cord away from moving parts on the tool.
6.
Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the tool.
7.
Do not force the tool. This tool will do the work better and safer at the speed
and capacity for which it was designed.
SKU 90814
PAGE 5
REV 01/04
