Page 2
For technical questions, please call 1-800-444-3353.
SKU 68821
Specifications
Electrical Input 120 V~ / 60 Hz / 6.5 A (Rated)
Cutting Speed
500-3000 Strokes Per Minute
Stroke Length
1-9/16 IN.
Footplate Tilt
0-45°, left or right
Blade Types
Uses T-Shank or
U-Shank Blades
Batteries
2 “AAA” for Laser Light
(not included)
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: <1 mW,
Wavelength: 650 nm
CLASS II LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
Diode Mfr.: Zhenjiang Bouncer Stone
Electron Co., LTD, No.16, Guyang Xincun,
Dingmao, Zhenjiang City, China
Manufacture Date: ___________, ______
AVOID
EXPOSURE
Laser light is
emitted from
this opening.
Save This Manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write
the product’s serial number in the back of the
manual near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the receipt
in a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey
all safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
General Power Tool
Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term ″power tool″ in the warnings
refers to your mains‑operated
(corded) power tool.
1.
Work area safety
a.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b.
Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
Power tools create sparks
which may ignite the dust or fumes.
c.
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
E194601
