SKU 66745
For technical questions, please call 1-800-444-3353.
Page 12
pressure adjust Knob
(69a):
Turn clockwise to
increase pressure and
counterclockwise to
decrease pressure.
Output coupler
(56a):
Connect end of
Spray Gun Hose
(20B) to here.
prOduct Features
power switch
(33a):
Press to turn the
Sprayer on or off.
prime/spray Knob (39a):
Turn horizontally to run the
Sprayer in “paint” mode.
Turn vertically to run Spray-
er in “prime/clean” mode.
siphon hose (50a):
Siphons paint from the
paint container into the
Spray Gun.
return tube
(43a):
Paint flows
from Return
Tube once
pressure is
released in
system.
air supply
connector (13B):
Connect end of Spray
Gun Hose (20B) to
here.
Clean Mode
Spray Mode
trigger (16B):
Press to spray or
clean.
safety lock
(18B):
Turn up to
keep Trigger
from being
pressed.
guard (24B):
Thread Spray Valve
(23B) into top of Guard.
spray Valve (23B):
Valve turned in “clean” mode.
spray Valve (23B):
Valve turned in “spray” mode.
spray Valve (23B):
Use to switch
between “clean”
and “spray” modes
(see below).
saddle (21B)
and
saddle
seal (22B):
Housed inside
the Guard and
serve as gas-
ket and seal.
trigger
guard (3B)