background image

SKU 65588 

For technical questions, please call 1-800-444-3353. 

Page 4

Have multiple ABC class fire extin

-

6. 

guishers nearby.
Operation of this equipment may cre-

7. 

ate sparks that can start fires around 

dry vegetation. 

A spark arrestor may be required. 

The operator should contact local fire 

agencies for laws or regulations relat-

ing to fire prevention requirements.
Set up and use only on a flat, level, 

8. 

well-ventilated surface.
Wear ANSI-approved safety goggles, 

9. 

heavy-duty work gloves, and dust 

mask/respirator during set up.
Use only oil (SAE 10W30) and fuel 

10. 

87+ Octane as noted in the “Specifi

-

cations” section of this manual.

operating precautions

1. 

carBon MonoxIde 

Hazard 

using an engine indoors 

can KILL You In 

MInutes. 

Engine exhaust contains carbon 

monoxide.  This is a poison you 

cannot see or smell. 

NEVER use inside a home or garage, 

EVEN IF doors and windows are 

open. 

2.  Only use OUTSIDE and far away 

from windows, doors, and vents.
Unconditioned electrical output can 

3. 

damage sensitive equipment; do not 

use to power sensitive electronic 

equipment without appropriate line 

conditioner (sold separately). 
Keep children away from the equip-

4. 

ment, especially while it is operating.
Do not leave the equipment unat-

5. 

tended when it is running.  Turn off 

the equipment (and remove safety 

keys, if available) before leaving the 

work area.
People with pacemakers should 

6. 

consult their physician(s) before 

use.  Electromagnetic fields in close 

proximity to a heart pacemaker could 

cause pacemaker  interference or 

pacemaker failure.  Caution is neces-

sary when near the engine’s magneto 

or recoil starter.
Use only accessories that are recom-

7. 

mended by Harbor Freight Tools for 

your model.  Accessories that may be 

suitable for one piece of equipment 

may become hazardous when used 

on another piece of equipment.
Do not operate in explosive atmo-

8. 

spheres, such as in the presence of 

flammable liquids, gases, or dust.  

Gasoline-powered engines may ignite 

the dust or fumes.
Stay alert, watch what you are doing 

9. 

and use common sense when operat-

Summary of Contents for 65588
























Reviews: