Item 62133
For technical questions, please call 1-888-866-5797.
Page 9
MAINTENANCE AND
SERVICING
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Calibration Knob of
the tool to its “OFF” position
and unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Cleaning and Maintenance
1.
BEFORE EACH USE,
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
2.
AFTER USE,
clean Bottom Sole
Plate (5) of any glue or adhesive that
may have transferred on by rubbing
on a clean scrap of carpeting while
still hot.
3. Place back on Iron Holder when not
in use.
4.
WARNING! If the supply cord
of this tool is damaged, it must
be replaced only by a qualified
service technician.
