Item 62133
For technical questions, please call 1-888-866-5797.
Page 3
grounded tools. Unmodified plugs
and matching outlets will reduce risk
of electric shock.
b.
Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
c.
Do not expose tools to rain or wet
conditions.
Water entering a tool
will increase the risk of electric shock.
d.
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the tool. Keep cord
away from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e.
If operating a tool in a damp
location is unavoidable, use a
Ground Fault Circuit Interrupter
(GFCI) protected supply.
Use of
a GFCI reduces th
e risk of electric
shock.
3.
Personal safety
a.
Stay alert, watch what you are
doing and use common sense
when operating a tool. Do not use
a tool while you are tired or under
the influence of drugs, alcohol or
medication.
A moment of inattention
while operating tools may result in
serious personal injury.
b.
Use personal protective
equipment. Always wear eye
protection.
Safety
equipment such
as fresh air mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
c.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the tool
in unexpected situations.
d.
Only use safety equipment
that has been approved by an
appropriate standards agency.
Unapproved safety equipment may
not
provide adequate protection. Eye
protection must be ANSI-approved
and breathing protection must be
NIOSH-approved for the specific
hazards in the work area.
4.
Tool use and care
a.
Do not force the tool. Use the
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it was
designed.
b.
Disconnect the plug from the
power source and allow to cool
before making any adjustments,
changing accessories, or storing
this tool. Such preventive safety
measures reduce the risk of damage
or injury.
c.
Store idle tools out of the reach of
children and do not allow persons
unfamiliar with this tool or these
instructions to operate the tool.
Tools are dangerous in the hands of
untrained users.
d.
Maintain tools. Check for
misalignment or breakage of
parts and any other condition that
may affect the tool’s operation.
If
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
5.
Service
a.
Have your tool serviced by a
qualified repair person using only
identical replacement parts. This
