Item 62133
For technical questions, please call 1-888-866-5797.
Page 7
SPECIFICATIONS
Electrical Requirements 120 VAC, 800 W
Power Cord
115" L, 3-Prong
Grounded
Temperature Range
145° - 432° F
Temperature Setting
Heat
Setting
Temperature
Range F
Time to Reach
1
145° - 195°
2 Minutes
2
192° - 228°
3 Minutes
3
298° - 367°
3.5 Minutes
4
361° - 432°
4 Minutes
UNPACKING
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at 1-888-866-5797 as
soon as possible.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Work Piece and Work Area Set Up
1. Designate a work area that is clean
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
2. Route the power cord along a safe
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage.
The power cord must reach the work
area with enough extra length to
allow free movement while working.
3. There must not be hazardous
objects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
General Operating Instructions
1. Place the Iron Holder (6) on a flat,
level, non-flammable surface.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves during
use. Forced-air ventilation may be
required depending on the type of
glue being heated.
3. Turn the Heat Control Knob (8) to the
“OFF” position.
4. Place the Iron securely into the Iron
Holder.
5. Turn the Heat Control Knob to the
setting desired and wait until the Iron
