Page 16
For technical questions, please call 1-888-866-5797.
Item 61441
SAFET
y
O
PERA
TION
M
AINTENAN
c
E
SETUP
Greasing Gearbox
Note:
Due to the possibility of accidental damage and/or contamination,
only a qualified technician should disassemble and lubricate this item.
1. Loosen the 4 Socket Head Bolts (57) that
connect the Cylinder Case (58) to the Crank
Shaft Case (8). Disassemble the Cylinder Case,
Ram (60) and Piston (61). See Figure P.
2. Clean the Cylinder Case, Piston and
Ram thoroughly, inside and out.
3. Check the condition of the O-ring (62).
If the outside diameter (OD) of O-ring is less
than the Piston’s OD, replace the O-ring.
4. Fill each of the 4 grooves inside the
Cylinder Case with 0.5 ounces of
synthetic high-temperature grease.
5. Slide the Ram back into the Cylinder Case
and fill it with 0.5 ounces of tool oil.
6. Carefully slide the Piston into Ram, making sure
that the O-ring stays in place and is not damaged.
7. Use the 4 Socket Head Bolts to connect
the Cylinder Case to the Crank Shaft
Case and tighten them securely.
cylinder
case (58)
Socket Head
Bolt (57)
Ram (60)
Piston (61)
crank
Shaft
case (8)
Figure P
Summary of Contents for 61441
Page 1: ......
