Figure 1-Guard attached to Motor Housing
Attaching the Wheel
The Electric Grass Trimmer comes with a Wheel Attachment (#1) which can act as a guide for
edging along lawns, fences and walls.
Step 1)
With the Guard (#6) in place, line up the two (2) holes in the Wheel Attachment (#1)
with the holes in the Guard and holes in the Motor Housing (#7). Secure in place
with two (2) Screws (#12)-see Figure 2.
Wheel Attachment
(#1)
#47944
Page 5
Head Adjuster Button (#8)
Motor Housing (#7)
Guard (#6)
FigFigurifj
Figure 2-Using the Grass Trimmer as an Edger
Replacing Nylon Line onto Spool
Step 1)
Turn OFF the Grass Trimmer and unplug the Power Cord (#18).
Step 2)
To remove the Spool Cap (#2) from the Spool (#4), press on the tabs on each side
of the Spool Housing (#21) and pull up on the Spool Cap (#2). Once the Spool
Cap (#2) is removed, the Spool (#4) will slide off of the Spring (#3)-see Figure 3.
Step 2)
Slide Spool (#4) off of the Spring (#3). Remove any Nylon Line (#5) remaining on the
Spool (#4)-see Figure 3.
Step 3)
Anchor one end of the new Nylon Line (#5) to Spool (#4). Wrap the Nylon Line (#5)
around the Spool (#4).
