Page 6
SKU 42654
For technical questions, please call 1-800-444-3353.
how often you do this type of work. To reduce your exposure to these chemicals;
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5,
et seq.
)
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 17) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
REV 01/05; 08/06
ASSEMBLY INSTRUCTIONS
NOTE: For additional references to the parts listed below, refer to the Assembly
Diagram on page 18 of this manual.
WARNING: Ensure that this item is completely and properly assembled
before use. Use of this item without all guards and/or safety devices in
place can result in SERIOUS PERSONAL INJURY or DEATH.
To Mount The Compound Miter Saw On A Workbench:
Caution:
Prior to mounting the Compound Miter Saw onto a workbench, make sure
the Compound Miter Saw is disconnected from its electrical power source.
With assistance, set the Compound Miter Saw in a desired location on the work-
bench. NOTE: Make sure the workbench provides a flat, level, sturdy surface
capable of supporting the weight of the Compound Miter Saw, tool accessories,
and work pieces.
1.
2.
