Page 3
SKU 42654
For technical questions, please call 1-800-444-3353.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
USE EYE, HEARING, AND BREATHING PROTECTION.
Wear ANSI-approved
safety impact eyeglasses, ANSI approved hearing protectors, and ANSI-approved
dust mask or respirator when using this product. ANSI approved safety impact
eyeglasses, hearing protectors, and dust masks and respirators are available from
Harbor Freight Tools.
DRESS SAFELY.
Nonskid footwear or safety shoes should be used when work-
ing with this product. Do not wear loose clothing or jewelry as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
DO NOT OVERREACH.
Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
STAY ALERT.
Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
CHECK FOR DAMAGED PARTS.
Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace or
repair damaged or worn parts immediately.
REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identi-
cal replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
MAINTAIN THIS PRODUCT WITH CARE.
Keep this tool clean and dry, and keep
saw blades clean and sharp for better and safer performance.
MAINTENANCE: For your safety, service and maintenance should be per-
formed regularly by a qualified technician.
USE THE RIGHT PRODUCT FOR THE RIGHT JOB.
There are certain applications
for which this product was designed. Do not use small equipment, tools or attach-
ments to do the work of larger industrial equipment, tools or attachments. Do not
use this product for a purpose for which it was not intended.
WARNING: The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur.
It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
