background image

Page 2

SKU 39954

For technical questions, please call 1-800-444-3353.

REV 08b, 08k

SPECiFiCATiOnS

Battery Type

Sealed, lead-acid, rechargeable, 17 Ah

Power Output

12 VDC, 900 amps peak; 400 amps starting power

Cables

Rubber insulated (#4) copper; 400 amp clamps

Compressor

260 PSI maximum pressure

Output Socket

12 VDC Cigarette lighter output

Features

Overload protection

• 

Automatic charge cutoff (at 14.5~15.5 volts) to help 

• 

prevent overcharging

Inflating Needle and Air Raft Tips

• 

note:

 Performance of this unit may vary depending on variations in local line voltage.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, 

operating and maintenance procedures, parts list and diagram.  Keep your invoice with this 

manual.  Write the invoice number on the inside of the front cover.  Keep the manual and 

invoice in a safe and dry place for future reference.

SAFETy WARningS And PRECAUTiOnS

WARNING:

 When using tool, basic safety precautions should always be followed to reduce 

the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

Wear eye protection. 

1. 

When working on or around lead-acid batteries, always wear 

ANSI-approved eye protection.

Avoid contact with Battery Acid.

2. 

  If splashed, immediately wash effected area with 

clean water.  Continue washing area until medical help arrives.

Connect cables to proper polarities.

3. 

  Connect RED POSITIVE (+) cable to Positive 

Battery Terminal first.  Connect BLACK NEGATIVE (-) cable to body ground (a non moving 

metal part) second.  

do not connect the BlACK nEgATiVE (-) cable to the negative 

Battery Terminal. 

 Turn vehicle ignition off before making cable connections.

Use this tool in well ventilated areas.

4. 

  Do not attempt to jump start vehicle around 

flammable gases or liquids.

do not allow the Black and Red clamps to touch.

5. 

  If this happens it can melt clamps 

or other metal objects. Place them only on the corresponding terminals.

12 Volt Systems Only.  

6. 

Use only with vehicles and boats with 12 volt electrical sys-

tems.

For emergency use only. 

7. 

Do not use this system in the place of a vehicle battery.  Only 

use to jump start your vehicle.

Avoid working alone

8. 

.  If an accident happens, an assistant can bring help.

Summary of Contents for 39954











Reviews: