Air Chicago (Standard/XW/XL/XXL)
Index
I-1
INDEX
C
Categories, General Operating Techniques 3-13
Chains and Belts 7-19
Drive Belts, Condition and Tension Check 4-8
Drive Chains, Clean and Lubricate 4-10
Feed Ribbon Drive Chain Tension Adjustment
7-21
Inlet Ribbon Drive Belt Tension Adjustment 7-23
Main Drive Chain Tension Adjustment 7-19
Primary Fold Ski Drive Chain Tension Adjustment
7-20
Primary Fold Ski Position Adjustment 7-25
Stacker Ribbon Drive Belt Tension Adjustment
7-24
Transfer Ribbon Drive Chain Tension Adjustment
7-22
Check
Air Pressure Settings 4-6
Belt and Ribbon Condition and Tension 4-8
Electrical Connections 4-15
Insulation Resistance to Earth Ground 4-16
Safety Equipment 4-3
Setscrews 4-9
Check and Clean
Inverter 4-4
Photosensors 4-3
Check and Grease
Stacker Door Bearings 4-7
CHI Panel
About 3-6, 5-6, C-3
Adjustment C-11
End Adjustment C-12
First and Second Crossfold C-14
Primary Fold C-13
Stacker C-14
Start Adjustment C-11
Diagnostic Message Index, Troubleshooting 6-6
Function Checkout, Installation 2-14
Operation C-3
Automatic (Program) Operation 3-10, C-4
Controls and Indicators C-3
Counters C-5
Jam Detection C-6
Manual Operation 3-10, C-4
Safety Stop Buttons C-6
Self-Diagnostics C-6
Topic continued on next page...
A
Adjustment, CHI Panel 3-11, C-11
End Adjustment C-12
First and Second Crossfold C-14
Primary Fold C-13
Stacker C-14
Start Adjustment C-11
Air Components, About
Air Cylinder 5-11
Air Filter/Regulators 5-10
Air Manifolds 5-11
Air Pressure Switch 5-10
Air Reservoir 5-10
Air Valves/Air Valve Solenoids 5-11
Pneumatic Clutch/Brake 5-11
Air Cylinder
Air Flow Adjustment
Stacker Door 7-43
Air Filter/Auto Drain
Clean 4-13
Inspect 4-5
Air Manifold Alignment
Crossfold 7-42
Primary Fold 7-41
Air Permeable Barrier 1-4, 3-2
Air Pressure Settings, Check 4-6
Air System.
See
Compressed Air System
Air Valve Repair 7-44
Annual PM (2000 Hours) 4-15
Check
Electrical Connections 4-15
Insulation Resistance to Earth Ground 4-16
Automatic Operation, CHI Panel 3-10, C-4
B
Bearings
Stacker Door, Check and Grease 4-7
Belts
Condition and Tension Check 4-8
Broken or Missing Ribbon Replacement 7-11
