3023-442
General
2
Chicago Dryer Company
Procedure
The air filter auto drain requires periodic
cleaning to maintain maximum filtering efficiency
and to avoid excessive pressure drop.
The cleaner the compressed air supply, the less
maintenance will be required. A visible coating
of dirt or condensate on the filter element surface
or excessive pressure drop is an indication that
cleaning is necessary.
WARNING
Before disassembling the air
filter/auto drain, turn off the
air supply and depressurize
the system and filter.
Required Tools
compressed air, mild detergent
solution, alcohol
Perform only when the unit is OFF
with power disconnected and COOL.
Turn off the compressed air supply and
depressurize the unit.
Turn power OFF at the main disconnect
switch.
Press the black plastic tab on the side of the
bowl case down (Figure 1, A) and rotate
it left or right until the two marks on the
bowl case light up with the single mark on
the filter base (B).
Pull down on the bowl case to remove
it. The filter base does not need to be re-
moved from the machine.
Take the polyurethane bowl (Figure 2, A)
and rinse with ONLY water and household
soap.
Unscrew the filter assembly and separate
the components (Figure 2, C, D, E).
1.
2.
3.
4.
5.
6.
Remove the filter element (Figure 2, D),
wash it in alcohol, and blow it out from
the inside.
Clean the other components (Figure 2, B,
C, E) with alcohol.
Re-assemble the clean components and in-
stall the filter assembly back on the base.
Re-attach the clean polyurethane bowl,
lining up the marks as in Step 3.
Press up on the bowl and twist left or right
until the plastic tap snaps into position.
7.
8.
9.
10.
11.
Figure 2:
All the components in the air filter
assembly can be washed with alcohol,
EXCEPT the bowl.
A
E
D
C
Figure 1:
Press the plastic tab and twist the
casing to line up the marks to remove
the filter bowl from the machine.
B
A
B