5
To do the setting, first hold both
UP
and
DOWN
buttons till the LED flashes. Then press
UP
button to select A or B and
DOWN
button to select 1/2/3/4.
Precisely, the two receivers of 1st
RR-2000
should be named as
A1
and
B1
, for 2nd as
A2
and
B2
, for 3rd as
A3
and
B3
, for 4th as
A4
and
B4
. This should be done so in accordance with the
preset programming in the Remote Control Center
RCC-2000
. (
RCC-200
has priority and
overrides this button for channel number.)
After name setting, the LED will return back to the allocated channel number programmed at
the
RCC-2000
.
■
Audio output connection
BALANCED output
: XLR connector provides balanced audio output signal from this jack to the
mixer/amplifier.
Use an audio
output cable with “XLR” or “Cannon” connector, connect one end
to the balanced output jack of the receiver, and the other end to the “
MIC IN
” jack of the mixer/
amplifier.
UNBALANCED output
: ¼” PHONE PLUG connector provides unbalanced audio output signal
from this jack to the mixer/amplifier.
Use
an audio output cable with ¼” PHONE PLUG
connectors. Connect one end from the unbalanced output jack of the receiver, and the other
end to the “
LINE IN
” jack of the mixer/ amplifier.
BALANCED
audio connection
UNBALANCED
audio connection
