7
HANDHELD TRANSMITTER
SQ-6100/SQ-7100
Microphone parts and functions
SQ-6100
SQ-7100
Cartridge
1
1
Battery weak/power LED
2
2
Power switch
3
7
LCD
4
4
Battery compartment
5
5
Bottom cap
6
6
Locking button
7
-
Audio mute switch
-
3
Setting button
8
8
Up button
9
9
Down button
11
11
Charging port
10
10
■
Battery installation & indicator
This transmitter requires 2 x AA batteries to operate.
To install, remove the battery cover and slide the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the transmitter when stored
for a long period. Batteries should be removed from the transmitter before storing without use
for more than 4 weeks.
When the transmitter is switched ON, a red LED
②
will blink once to indicate the batteries
installed are in good condition.
If the LED remains illuminated, it means the batteries are
weak and require replacement.
■
Channel setting
Use
UP
or
DOWN
button to go to the
CHANNEL/ FREQUENCY
page.
The cursor will flash to allow changes to be made. Pressing
UP
or
DOWN
button will increase
or decrease the channel number. The corresponding frequency will change accordingly. When
a desired channel is selected, it will be automatically saved and stored in the memory.
1
2
3
4
5
6
9
10
11
7
8
