6
Using the wireless receiver
2-2-2. Channel scanning
For an interference- free operation, a cleaner channel might be necessary if the current one
receives too much interference. To operate the scanning:
1
Press
▼(down) or ▲(up) button to make
the frequency icon
appear on the
bottom.
2
Hold
SET
button until this icon
flashes to denote readiness for setting.
3
Press
▼(down) or ▲(up) button to find
and locate a clear, interference- free
channel.
4
After a channel is chosen, press
SET
button or wait 5 seconds to store the
setting.
2-2-3. Squelch (SQ) setting
When interference is encountered try reducing the sensitivity of the receiver, thus less
susceptible to interference. To operate the squelch setting:
1
Press
▼(down) or ▲(up) button to turn to
the squelch setting page.
2
Hold
SET
button until this icon
flashes to denote readiness for setting.
3
Press
▼(down) or ▲(up) button to select
a new squelch level between
01
and
10
.
The default level is
01
.
4
After a level is chosen, press
SET
button
or wait 5 seconds to store the setting.
Since increasing the squelch level will also reduce the reception distance, it’s recommended to
choose the lowest level that can eliminate the interference.
If this still does not solve the problem it means this frequency is not suitable. Adjust the squelch
back to its default level (
LE-01
) and use the scan function to locate a clear, interference-free
channel.
RF
CH
FREQ
RF
AF
A B
099
674.500
CH
FREQ
RF
AF
A B
099
674.500
RF
CH
FREQ
RF
AF
A B
089
672.000
RF
SQ
le-01
SQ
le-01
RF
SQ
le-03
