12
Connecting MONO/SUBWOOFER speaker (SUB/MONO OUTPUT)
3. Application
3-1. Connecting MONO/SUBWOOFER speaker (SUB/MONO OUTPUT)
1
Plug the external speaker’s audio cable to the 6.3mm or 2P PHOENIX jack on the rear
panel. The speaker
’s impedance must be 4Ω or more. When using 2P PHOENIX for
connection, please accord with the positive (+) and negative (-) polarities.
※
IMPORTANT! Either 6.3mm or 2P PHOENIX jack can be connected.
or
2
Slide the switch to
MONO(BYPASS)
mode when connecting to a mono speaker.
SUB
mode to a subwoofer.
Subwoofer speaker
Mono speaker
3
There is crossover control on the rear panel for external subwoofer speaker. This
control can decide the frequency to amplify or mute the audio. Only audio below the
crossover frequency will be amplified to the subwoofer speaker.
4
Turn on the power and then adjust
SUB/MONO
volume control on the front panel to a
desired level.
5
BASS / TREBLE equalizer (refer to P.11) can be adjusted individually..
or
