ISO 9001
｜
ISO 14001
｜
OHSAS 18001
-8-
3.
To change the receiver’s channel, please press the synchronizing button of the microphone.
The microphone will transmit synchronizing signal to the receiver and change its channel.
4.
To change the microphone’s channel, please press the synchronizing button of the receiver.
The receiver will transmit synchronizing signal to the microphone and change its channel.
Other settings
（
SQ-6100 IrDA
）
1. Channel setting
Use
MENU
button to go to the
CHANNEL/FREQUENCY
page.
︰
After pressing the
SET
button for 3 seconds, the cursor will flash to allow changes to be made.
Pressing
SET/MENU
buttons will increase/decrease the channel number. The corresponding
frequency will change accordingly. 3 seconds after selecting a channel, it will be automatically
saved.
2. Battery type setting
Use
MENU
button to go to the
BATTERY TYPE
page.
︰
After pressing the
SET
button for 3 seconds, the cursor will flash to allow changes to be made.
Press
SET
button to select either
NiMH
(rechargeable battery) or
AKLN
(alkaline battery). 3
seconds after selecting a battery type, it will be automatically saved.
Remark:
NiMH
battery must be selected when rechargeable battery is being used. Never select
AKLN
(alkaline) when microphone is intended for charging as alkaline battery isn
’t
rechargeable. Wrong battery selection will result in battery sensing electronics to display wrong
and misleading status information.
