-11-
UHF handheld microphones
（
SQ-1016/SQ-1016V/SQ-5016
）
1
2 3
5
7
4
6
8
SQ-1016/1016V
(UHF 16-freq)
1
2
3
4
5
6
9
10
11
7
8
SQ-5016
(UHF LCD 16-freq)
Microphone parts and functions
SQ-1016
SQ-1016V
SQ-5016
Cartridge
1
1
1
Battery weak/power LED
2
2
2
Power switch
3
3
3
Channel switch
4
4
-
LCD
-
-
4
Battery compartment
5
5
5
Bottom cap
6
6
6
Locking button
-
-
7
Audio mute switch
-
-
-
Setting button
-
-
8
Up button
-
-
9
Down button
-
-
11
Charging port
7
7
10
Volume control
-
8
-
Battery installation & indicator
This microphone requires 2 x AA batteries to operate.
To install, remove the battery cover and slide the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the microphone when
stored for a long period. Batteries should be removed from the microphone before storing
without use for more than 4 weeks.
When the microphone is switched ON a red LED (2) will blink once to indicate the batteries
installed are in good condition.
If the LED remains illuminated the batteries have expired
and require replacement.
Channel setting (SQ-1016/1016V)
Please use the attached small screw driver to set the channel.
Volume adjusting (SQ-1016V)
Please slide the wheel to adjust the volume.
