BODYPACK TRANSMITTER IWM-302
Making changes to settings in IWM-302
Making changes to CH:
First open the cover of IWM-302's battery compartment by pressing its
release buttons on both sides. There are 2 channels for selection, namely
"A" and "B".Either can be chosen by switching this selector(B).
Making changes to MT:
Low-impedance "MT" gain control is situated inside the battery
compartment. It can be adjusted by using a small screw driver to rotate till
a desired audio output level has been selected.
Installing batteries to IWM-302
To install the batteries, first open the battery compartment by pressing the release
buttons on both sides of the IWM-302. Batteries used are 2 pcs of NiMH
1.2V/2100 mAH type(rechargeable) or Alkaline type(not rechargeable). When
inserting batteries, please place them according to the correct polarity..
1. Volume control
2.Bi-color Power on / Batter-
status indicator:
3.Power switch
4.5-pin mini XLR connnector
5.Lavalier microphone
6.Mic clip
7.Infrared emitter
8.Cover-release button
9.Charging contacts
3
4
2
1
6
5
8
9
7
A
5
B
C
Transmission-strength selector
MT
Channel s elector
Handheld Microphone
Drop-in Charger HC-20
1.Connect the AC adapter to a wall outlet and beware of your local AC rating.
2.Drop in the handheld microphone with the drained-out original battery into the
charger. Charging process will start automatically.
3.During charging, LED will turn RED. Charging process will take approx.
3.5hours.
4.When charging is completed, LED indicator will turn GREEN.
5.Please use the Chiayo specified rechargeable battery only. When other type
of battery is installed, there is no guarantee that charging will work.
NOTE:
It is imperative to use only Chiayo specified rechargeable battery as other
rechargeable battery may not able to work with the charger.
6
7
Summary of Contents for IWA-300
Page 2: ......
