DWR-5420/DH-5400/DB-5400
Dual-Channel Three Redundancy Digital Wireless Microphone System
SCAN mode setting
There are five scan modes for selection:
A-SCAN, F-CH01, F-CH02, F-CH03
and
F-CH04
.
Mode
A-SCAN
F-CH01
F-CH02
F-CH03
F-CH04
Function
The microphone will automatically operate
radio scanning to find and locate a group
of clear, interference-free channels after
entering
A-SCAN
page and holding
SET
button.
There are four modes for selection. Each
mode includes several working channels
which are different from those in any other
mode.
When to choose
◼
First-time operation.
◼
Obvious environmental interference
exists / happens.
◼
Only one
DWR-5420
system (two
transmitters) in the room.
◼
Two
DWR-5420
systems (four
transmitters) to operate simutaneously
in the same room.
◼
One system operates on
F-CH01
and
F-CH02
modes and the other system
on
F-CH03
and
F-CH04
.
Auto freq hopping
Yes
Yes
1
Use
MENU
button to go to the SCAN mode page.
2
Press and hold
SET
button until the scan mode flashes to denote readiness for setting.
3
Press
SET
or
MENU
button to select a scan mode between
A-SCAN, F-CH01, F-CH02, F-
CH03 and F-CH04.
6 seconds after selecting a scan mode, it will be automatically saved
and the mode will not change after reboot until the setting is changed again.
4
Without any button pressed, the transmitter will operate scanning and then change to
A-
SCAN
mode.
CHIAYO ELECTRONICS CO., LTD.
Http://www.chiayo.com.tw
｜
Email: [email protected]
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: 886-2-27415741
｜
Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: 886-5-2711000
｜
Fax: 886-5-5767611
12I1488
