User Manual
Push To Talk Microphone ONE-PTT for ONE systems.
PTT
Page 1: ...User Manual Push To Talk Microphone ONE PTT for ONE systems PTT ...
Page 2: ...beginning the microphone installation put an ESD bracelet on your wrist and stick the other end to any non painted metallic part inside of the equipment 6 The equipment must be installed by qualified or trained personnel 7 The wiring must be carried out only by trained personnel Disconnect the audio outputs while making connections and disconnect the equipment from the power supply Be sure to use ...
Page 3: ...onnected in the PRIO audio inputs 1 or 2 CONFIGURATION Connections should be made according to the quick guide located in the last page of this manual no further configuration is needed With the ONE default configuration if you press the PTT microphone the audio will be routed to all zones You can change the corresponding input settings in the PA Matrix screen menu Additional advanced configuratio...
Page 4: ...he first or second position beginning from the upper left corner and tighten the nut 4 Fix the microphone stand using any cabinet screw with the hang Only one screw is needed Close the device and configure routing and volume according to your preferences using screen menu 3 1 Insert the ONEPTT Module in the USB port 3 2 Plug the wire of the PTT connector tap in the indicated socket 3 3 Plug the gr...
