SAFETY INSTRUCTIONS
Please, read carefully these safety instructions.
1. Save this User Manual for future reference..
2. The equipment should not be exposed to water or splashing and objects filled
with liquids should not be placed on the equipment. Do not use liquid or spray detergent
for cleaning. Do not expose this equipment to wet areas.
3. No flame sources, such as lighted candles, should be placed on the equipment.
4. Install this equipment following this user manual. If you do not place the
equipment correctly, it may fall and be damaged.
5. Before beginning the microphone installation put an ESD bracelet on your wrist
and stick the other end to any non painted metallic part inside of the equipment.
6. The equipment must be installed by qualified or trained personnel.
7. The wiring must be carried out only by trained personnel. Disconnect the audio
outputs while making connections and disconnect the equipment from the power supply.
Be sure to use the proper cables to make the connections.
CONTENTS
1. LDA Dynamic microphone with push to talk button.
2. Circuit board with preamp and connectors.
3. Cable patch to fix in ONE cabinet. Includes a 36mm tap and microphone connector.
4. Cable patch for audio input connection. Includes audio and TTL.
5. ESD bracelet to avoid any damage in internal circuits.
2
