8
Instructions
Equalizer setting
Equalizer adjustment is actually used to increase or reduce the high/medium/low frequency
component of the speaker's restored sound. It is so-called raising or attenuating treble/bass via
frequency-specific volume controls to improve human voices or make m
usical instruments’
sound more prominent. According to the scale values on the screen, UP button is to increase
and boost and DOWN button to decrease and attenuate.
Adjust the level of high frequency (Treble), middle frequency (Middle), and low frequency (Bass)
respectively. All signals have been balanced by the high and low sounds after entering the
receiver so it is not necessary to adjust the equalizer during the output to the speaker. It is
recommended to maintain the value of BASS, MIDDLE and TREBLE at 0 dB.
DISPLAY
BASS
MIDDLE
TREBLE
FUNCTION
increase or reduce the low
frequency component of the
sound
increase or reduce the
medium frequency
component of the sound
increase or reduce the high
frequency component of the
sound
RANGE
-8 dB
～
+8 dB
DEFAULT
0 dB
1
Press
SET
button to make the frequency icon
appear with EQ value flashing.
Then press
SET
to choose your target EQ band between 300 (BASS), 1000 (MIDDLE)
and 3000 (TREBLE) (Hz).
→
→
BASS
MIDDLE
TREBLE
2
Press DOWN(
▼
) and UP(
▲
) button to adjust the EQ value by 2dB / step, from -8
(min) to 8 (max). The default BASS/MIDDLE/TREBLE level is 0 (dB).
3
After a level is chosen, wait about 5 seconds to save the setting and the level will not
change after reboot until the setting is changed again.
SET
SYNC
SET
SYNC
