Chevrolet Uplander Owner'S Manual Download Page 229

Page: 229 / 592

2. Then push the tab, located on the left of the

inner access panel, to the right.

3. The first air filter will pull straight out. To

remove the second, reach in and slide it
toward the opening. Pull the second filter out.

4. Replace the filters by reversing Step 3. Make

sure the filters are inserted so that the sealing
foam is angled in the same direction on
both filters. For the type of filter to use, see

Normal Maintenance Replacement Parts
on page 550

5. Close the inner access door, while squeezing

the tab. Be sure it is tightly closed.

6. Snap the outer access panel into the back of

the glove box.

229

Summary of Contents for Uplander

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Uplander

Reviews:

Related manuals for Uplander

Brands by name

Popular brands

Chevrolet Uplander, Owner'S Manual

Search results

Summary of Contents for Uplander

Reviews:

Related manuals for Uplander

Brands by name

Popular brands