Chevrolet Uplander Owner'S Manual Download Page 182

Page: 182 / 592

4. Firmly press down making sure the latch is

flat with the ribs (A) on the storage bin.

5. Switch hands and repeat Steps 2 through 4

for the latch on the opposite side of the
storage bin.

6. Reverse these steps in order to remove the

storage bin.

If your bin is equipped with the hand size latches
do the following:

1. Place the storage bin on to the rails in the

desired location.

2. Push firmly upward on the bin while supporting

it with one hand.

3. The bin will snap into place.

4. To remove the bin, support the bin with one

hand while pulling each latch up and away
from the bin.

182

Summary of Contents for Uplander

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Uplander

Reviews:

Related manuals for Uplander

Brands by name

Popular brands

Chevrolet Uplander, Owner'S Manual

Search results

Summary of Contents for Uplander

Reviews:

Related manuals for Uplander

Brands by name

Popular brands